SocketScan 700 Series

FAQ

• My scanner is not holding a charge.

  Possible Cause:		Solution:
  Your batteries need to be reset.		Remove the battery cover from the back of the barcode reader, extract the batteries and put them aside for 10 minutes. Re-insert the batteries, replace the battery door and charge until the battery indicator light turns green (up to 6hrs). See Also: How do I replace my SocketScan 700 Series batteries?  How do I change my 800 Series battery?  How do I replace my DuraScan battery?

  ---

  Possible Cause:		Solution:
  Your batteries need replacing.		Remove the battery cover from the back of the barcode reader, extract the batteries and replace with 2 x AA Rechargeable NiMH batteries. Replace the battery door and charge until the battery indicator light turns green (up to 6hrs). See Also: How do I replace my SocketScan 700 Series batteries?  How do I change my 800 Series battery?  How do I replace my DuraScan battery?

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My host device cannot find the reader.

  Possible Cause:		Solution:
  The reader is already paired with another host device.		Unpair the reader. Then pair the reader and new host device.

  ---

  Possible Cause:		Solution:
  The host device is too far from the reader. The Bluetooth is out of range, over 33 ft. (10m) from host device.		Move the devices closer together. The Bluetooth range is within 33ft. (10m) from host device.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

  ---

  Possible Cause:		Solution:
  The reader is not powered on.		Power on the reader.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

  ---

  Possible Cause:		Solution:
  Your host device does not have Bluetooth enabled.		Enable Bluetooth on your device.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• Does my barcode reader need to be in Application Mode or Basic Keyboard Mode?

  The mode you need to be in depends on the software application you are using your Socket Mobile reader with.

  Application Mode

  Below is a list of the most common apps that require the reader to be in Application Mode to work correctly.

  • Shopify
  • Square
  • Lightspeed
  • Zettle by PayPal
  • Shopkeep
  • NCR Silver
  • Vend
  • Building Reports

  A more comprehensive list can be found on your region's Business Applications page: WW, AU, EMEA, UK.

  Application Mode Set-Up Instructions - If you are using one of the apps listed above, or one that is found on our Business Apps page, you can set up your barcode reader after downloading the Companion application:

  • Apple App store
  • Google Play store 
  • Windows version 

  Once the reader has been paired using Socket Mobile Companion, launch the required software application, the reader will connect to it and you’re all set.
  

  Basic Keyboard Mode (HID)

  Below is a list of the most common Apps that require the reader to be in Basic Keyboard Mode (HID) to work correctly.

  • Notes
  • Microsoft Excel / Spreadsheet
  • Microsoft Word
  • Google Docs online
  • Safari
  • Any text field in a web-based application

  Basic Keyboard Mode Set-Up Instructions – No additional software is required. The Socket Mobile reader is paired directly to the host device in Bluetooth settings and when a barcode or RFID tag is read, the data is delivered to the available text field or where the cursor is flashing on the screen. In Basic Keyboard Mode, if there is no active text field or flashing cursor, the reader will still read the barcode or tag, but no data will be delivered to the software application. In this situation, touch the screen to activate the field or cursor and read the barcode/tag again.

  ---

  For Barcode Readers Only

  Basic Keyboard Mode (HID) set-up steps

  1. Remove any existing Socket Mobile reader from the host device’ Bluetooth settings.
  2. Turn the reader on and scan the factory reset barcode below.

  

  The reader will play a tune and shut down.

  3. Power the reader back on and scan the Basic Keyboard Mode (HID) barcode below. The reader will emit 3 tones and will now be discoverable in HID mode.

  
  

  4. Open Bluetooth settings in the host device.
  5. After a few seconds, when the Socket Mobile reader is discovered, tap it on the screen to start the pairing process.
  6. After a successful pairing, the connection status will change to "Connected", the blue light will turn solid and the reader will emit a single beep.
  7. To test – Open your application, position the cursor as required and scan a barcode.

  ---

  Important - If connecting to an Apple device in Basic Keyboard Mode, the Apple on-screen keyboard will be disabled. Simply double-tapping the power button will toggle the keyboard up / down. See this video for details .

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• Can I use my reader in Application Mode with applications such as MS Excel, MS Word, Notes, Google Docs, or in a web browser text field?

  On Apple iOS devices it's possible to use a Socket Mobile reader in Application Mode and read data into applications such as MS Excel, MS Word, Notes, or when scanning into a web-based text field. Please follow the instructions below:

  1. Download and install the Socket Mobile Companion app  from the Apple App store.
  2. Launch Socket Mobile Companion and add your reader.
  3. Download and install the Socket Mobile Keyboard  from the Apple App store.
  4. Launch SM Keyboard and follow the in-app instructions.

  Please view this walk-through video showing how to set your reader up with SM Keyboard on Apple iOS devices  if needed.

  Note: This is currently only available on Apple iOS devices. Android capability will be added in the near future.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• When I read a barcode or NFC tag, no data appears on my screen.

  Possible Cause:		Solution:
  Although your device says it's connected, you are in the wrong mode.		If you are scanning into an application such as Shopify, Square or Zettle by Paypal, restart the host device and pair your reader to your host in Application Mode using Socket Mobile Companion App  (AU,  EMEA, UK) Watch: How to Pair Using Companion App  If you are scanning into an application such as Notes, MS Word, MS Excel or you are scanning into a text field in a web browser, please follow these instructions  (AU, EMEA, UK).

  ---

  Possible Cause:		Solution:
  The scanner is too close or too far from the barcode or at an incorrect angle.		Practice scanning at different distances and angles. Reading distance depends on barcode size, symbology, label media, Narrow and Wide ratio, and scan angle.

  ---

  Possible Cause:		Solution:
  The barcode is incorrectly formatted, damaged or poorly printed.		Try scanning a barcode that is correctly formatted, printed clearly and in good condition.

  ---

  Possible Cause:		Solution:
  The barcode symbology may be disabled or not supported by the scanner.		Enable the symbology. If you do not know the symbology of the barcode contact support  (AU, EMEA, UK)

  ---

  Possible Cause:		Solution:
  If you are in Basic HID Mode, you don’t have an application open to read data into.		Open an application (i.e. Notes). Place the cursor where you want to enter the data and try reading again.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My reader is no longer connected.

  Possible Cause:		Solution:
  The host device or your software application has performed an automatic update and affected the Bluetooth pairing.		If you are scanning into an application such as Shopify, Square or Zettle by Paypal, remove/unpair the reader from Bluetooth settings within the host device, close all running apps, restart the host device and pair your reader to your host in Application Mode using Socket Mobile Companion App ( AU, EMEA, UK) Watch: How to Pair Using Companion App If you are scanning into an application such as Notes, MS Word, MS Excel or you are scanning into a text field in a web browser, remove/unpair the reader from Bluetooth settings within the host device, reset the reader  and pair directly to the host device in basic HID (Keyboard Emulation) Mode.

  ---

  Possible Cause:		Solution:
  The scanner powers off and disconnects after 2 hours of no activity by default.		Turn off your host device's Bluetooth then scan the "scanner is always on" barcode below to configure your scanner.

  ---

  Possible Cause:		Solution:
  The reader is low on battery, less than 5%.		Ensure the reader is connected to power.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My reader frequently disconnects from Bluetooth.

  Possible cause:		Solution:
  You have an older host device. Older models may struggle to maintain a Bluetooth connection.		Reset/restart your host device.

  ---

  Possible cause:		Solution:
  Your iPad/tablet's Auto-lock feature is enabled.		Disable iPad/tablet's auto-lock feature.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My reader turns off randomly on its own.

  Possible Cause:		Solution:
  Your batteries need to be reset.		Remove the batteries from your reader, leave them out for 10 minutes, re-insert and recharge the scanner overnight.

  ---

  Possible Cause:		Solution:
  The reader is being charged incorrectly. Important! - Charging your reader using an incorrect source (such as a computer USB port) will not provide enough current to charge reader. This may result in the reader registering as having more charge than it does and shutting down.		We recommend charging your reader using a suitable AC Power Adapter .

  ---

  Possible Cause:		Solution:
  Your reader has not been used in 2 hours. By default, the reader powers off and disconnects after 2 hours of no activity.		Turn off your host device's Bluetooth then scan the "reader is always on" barcode below to configure your reader (barcode readers only).

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• I still can't connect my reader.

  Possible Cause:		Solution:
  Your reader does not have enough power.		Please ensure your reader is sufficiently charged. If your reader is brand new it requires an initial charge of up to 8 hours. If your reader does not fully charge, please submit a Hardware Support request for your region: WW, AU, EMEA, UK.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• Can I pair and connect my Socket Mobile scanner to multiple host devices at the same time?

  In short, no. Socket Mobile readers can only be paired and connected to one host device at any one time. To switch your reader to a different host device please reset the reader to make it discoverable and follow the relevant pairing instructions to pair and connect to the desired host.

  To re-pair to a previous host device, the Socket reader must also be removed from the host device's Bluetooth settings.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• How do I replace my SocketScan 700 Series batteries?

  What you will need:

  • A Phillips screw driver
  • (2) AA rechargeable batteries with NiMH

  
  Instructions:
  

  1. Loosen screw with a screw driver.
  2. Remove battery door.
  3. Remove and replace batteries.
     Warning: Installing the batteries incorrectly may damage the scanner.
  4. Attach battery door and tighten screw.

  Battery life may vary with vibrate settings and work environment. Replace within 2 years.

  Important: Only charge NiMH rechargeable batteries. Charging alkaline or other battery types will damage the scanner.

  Recommended: Use the same 2000 mAh batteries (brand name not necessary). Note that using lower capacity may not meet its advertised specifications.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• The iPad's keyboard won't pop up.

  Possible Cause:		Solution:
  You are paired and connected in Basic Mode (HID).		Double tap the power button to enable/disable the on-screen keyboard. Watch: How to Enable On-Screen Keyboard for Apple iOS

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• I have an Apple device and my keyboard is missing. How do I enable it?

  If you have paired a Socket Mobile barcode reader to an Apple device in Basic Keyboard Mode and the iOS keyboard is missing, simply double-tap the power button to toggle the iOS keyboard up/down as required.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• I have an android device and my keyboard is missing. How do I enable it?

  To enable the on-screen keyboard when connected to an Android device in Basic Keyboard Mode, please follow the instructions below:

  1. Open Settings in your device
  2. Select Language and Keyboard
  3. Select Physical Keyboard
  4. Toggle "Show on-screen keyboard" to the on position

  Please note, the wording above may vary between different versions of Android. For example, below are two different screens with the setting in question outlined in red:

  

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• How do I pair my Socket Mobile scanner in Application mode on my PC?

  Please download and install the Companion App for Windows .

  Once downloaded please run the application and follow the on-screen instructions.
  

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My scanner will not automatically scan barcodes.

  Possible Cause:		Solution:
  Your scanner is not placed in Auto Scan mode.		Scan the appropriate command barcode to configure your scanner. Please ensure the reader is not connected to the host device when scanning a programming barcode. When a programming barcode is read successfully, you will hear this noise: If your reader emits a single beep, please disconnect from Bluetooth and try again.

  ---

  Possible Cause:		Solution:
  Your barcode scanner does not support Auto Scan mode.		Only 2D Socket Mobile barcode scanners support Auto Scan mode - See all 2D models  (AU, EMEA, UK).

  Did this resolve your issue?
  Please contact our Barcode Support Team if you need further assistance.

• I cannot download or use the Companion app to pair. What do I do?

  ---

  Possible Cause:		Solution:
  Password not available to download the app.		Use the instructions below. Turn off host device's Bluetooth. Power on the scanner. Scan Factory Reset. Watch: How to Perform a Factory Reset Power on the scanner again and scan Bluetooth connection barcode. Basic Mode for all OS: Application Mode (MFi-SPP) for Apple iOS: Application Mode (SPP) for Android or Windows PC: Turn off host device's Bluetooth back on and pair. Complete user guide

  ---

  Possible Cause:		Solution:
  You have a laser barcode scanner that can only scan printed barcodes.		Use instructions below. Turn off host device's Bluetooth. Power on the scanner. Scan Factory Reset. Watch: How to Perform a Factory Reset Power on the scanner again and scan Bluetooth connection barcode. Basic Mode for all OS: Application Mode (MFi-SPP) for Apple iOS: Application Mode (SPP) for Android or Windows PC: Turn off host device's Bluetooth back on and pair. Complete user guide

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• How do I pair my Socket Mobile reader in Basic Keyboard Mode (HID)?

  Basic Keyboard Mode Set-Up Instructions

  The barcodes contained within the set-up instructions can be read directly from the screen. However, if you have a laser engine model (S730, D730, DS900, XS930, XG930, 7Mi, 7Pi) you will need to print the barcodes.

  1. If the Socket Mobile reader has previously been paired to your host device, please remove it from Bluetooth settings.
  2. Turn on the Socket Mobile reader.
  3. Scan the Factory Reset barcode below, the reader will shut down.
     

  4. Turn the reader back on and scan the Basic Keyboard Mode barcode below.
     

  5. Open Bluetooth settings in the host device.
  6. When the Socket reader is discovered, tap it on the screen to start the pairing process.
  7. After a successful pairing, the connection status will change to "Connected", the blue light will turn solid and the reader will emit a single beep.

  You are now connected in Basic Keyboard Mode

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My Charging Dock/Charging Stand does not charge my scanner.

  Possible Cause:		Solution:
  There is no power in the outlet.		Plug the power adapter into a different power outlet.

  ---

  Possible Cause:		Solution:
  The Charging Cable is not plugged securely into the Charging Stand or Charging Dock.		Ensure the Charging Cable is plugged in securely.

  ---

  Possible Cause:		Solution:
  The charging pins are not making contact with the Charging Stand/Charging Dock.		Check the scanner’s charging pins are contacting the pins on the dock/stand.

  ---

  Possible Cause:		Solution:
  The screw on the battery door is loose.		Make sure to tighten the screw on the battery door.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• How do I clean and care for my Socket Mobile reader?

  To clean your Socket Mobile reader simply wipe with a cloth dampened with isopropyl alcohol. Alternatively, wipe with a Sani-Cloth.

  Warning:

  • DO NOT IMMERSE IN WATER (Reader's mechanics could be damaged)
  • DO NOT USE BLEACH FOR CLEANING (Reader's material property may be affected)

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• The scanner does not scan the whole barcode when we are scanning in the Safari, Chrome or Firefox web browser. Is there something wrong with my scanner?

  This is an issue with the IOS 10 and newer updates. Socket Mobile has notified Apple of this issue and we are hoping that Apple will be addressing this in a new IOS (operating system) update.

  For the time being we are asking our customers to use another web browser, such as Dolphin or Opera Mini instead.

  If you continue to have this issue in different web browsers, please submit a service ticket to Socket Mobile’s Support Center (WW, AU, EMEA, UK, JP)

  Did this resolve your issue?
  Please contact our Barcode Support Team if you need further assistance.

• What affects my scanning speed?

  Socket Mobile’s barcode scanners were designed for efficiency, delivering both speed and accuracy to users. If at some point you find that your scanner is not performing as quickly as you would like it to, there are several reasons why your scanner may not be performing to its fullest potential. There are simple explanations and remedies to these issues.

  • Barcode
    The amount of data a barcode holds can affect the scanning speed. If a barcode carries a small amount of data, then using Basic Mode (HID) for your scanner will work smoothly. However, in HID Mode the scanner behaves like a keyboard, so it takes a significantly longer time when you have a barcode with a large set of data to pass.
  • Host Device
    The distance between the scanner and host device can affect the scanning speed. As long as your scanner remains within its designated range, the scanning speed should not be affected. (Note: If the speed is running slow, a restart of your host device may be required.)
  • Scanner
    An old scanner may run slower with an updated host device. Depending on the age, older scanners may not have the necessary updates to work seamlessly with a newer host device’s system.

  All Socket Mobile scanners have an Application Mode in which the data can be transferred in large blocks, resulting in significant time saving for large barcode scanning, which is common for 2D Barcodes. Watch the video to see the different speeds and uses between Basic Mode (HID) and Application Mode (SPP).

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• What kind of Warranty does Socket Mobile offer?

  Socket Mobile devices ship with a limited 1-year warranty. Optional 2-year and 4-year warranty extensions are available. Full details are available at SocketCare Extended Warranty Service: WW, AU, EMEA, UK, JP

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• How to Scan 1D and 2D Barcodes.

  Reading distance depends on barcode size, symbology, label media, narrow and wide ratio, and scan angle. Minimum barcode size is 5 mils. Ensure your barcode is correctly formatted, not damaged or poorly printed.

  1. Hold your scanner 4-5 inches away and center your beam.
  2. Press and hold the scan button to start scanning barcodes.

  How to scan 1D and 2D barcodes 

  Did this resolve your issue?
  Please contact our Barcode Support Team if you need further assistance.

• How to scan OCR and travel documents.

  Currently, only the D760 and the later version of the S740* are capable of reading OCR characters and travel documents such as a passport. 

  Scanning OCR fonts is like taking a photograph with a barcode scanner.

  1. Hold your scanner 5-6 inches away and center your beam.
  2. Press and hold the scan button to start reading OCR.

  How to scan OCR and travel documents 

  * The later version of the S740 has a green/white scan beam . The previous S740 version with a red beam will not read OCR characters or passports

  Did this resolve your issue?
  Please contact our Barcode Support Team if you need further assistance.

• What do the reader's beeps and tones mean?

  Visit our sounds and indications page  (AU, EMEA, UK) to hear the various reader tones and their meanings.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• My reader is getting hot.

  If your Socket Mobile reader gets too hot while charging, unplug it right away.

  Charging can make your reader a little warm, but if it feels hot to the touch, you should immediately disconnect it from its power source, then, contact our support team via the Hardware Support form  (AU, EMEA, UK).

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.

• What do the reader's lights and scan beams look like?

  Visit our lights and scan beams page  to see how they appear.

  Did this resolve your issue?
  Please contact our Customer Support Team if you need further assistance.